Assessment Validation: A Detailed Guide to Validate Assessments

Assessment Validation: A Detailed Guide to Validate Assessments

Blog Article

Once RTOs receive registration, they must oversee many aspects such as annual declarations, AVETMISS reporting, and marketing compliance. Of all these duties, validation is frequently the most daunting.

Although we have published several articles on validation, let’s revisit the term. ASQA describes validation as a quality review of the assessment process.

Validation is essentially about verifying the accuracy of parts of an RTO's assessment process and spotting areas needing improvement. Understanding its key components can make it less daunting.

Clause 1.8 in the SRTOs 2015 outlines that RTOs must ensure their assessment systems, including RPL, comply with training package requirements and the Principles of Assessment and Rules of Evidence.

The standards mandate two types of validation.

The first type of assessment validation checks that your RTO's assessment aligns with the training package requirements in your scope.

The subsequent validation confirms that assessments are conducted according to the principles of assessment and rules of evidence.

Thus, we understand that validation is done before and after the assessment. This article highlights the first type: assessment tool validation.

Defining the Two Types of Assessment Validation

Breaking Down Assessment Validation

As we mentioned earlier and in our past blogs, validation consists of two parts: (1) assessment tool validation and (2) post-assessment validation.

Assessment tool validation, also known as pre-assessment validation or verification, pertains to the first part of the clause, focusing on ensuring all unit requirements are met and that all workbooks are fully compliant.

In post-assessment validation, the emphasis is on implementation, ensuring that Registered Training Organisations conduct assessments as per the Principles of Assessment and Rules of Evidence.

This discussion will center around assessment tool validation.

Steps to Perform Assessment Tool Validation

Having discussed the two types of validation, let’s delve into assessment tool validation.

When is Assessment Tool Validation Conducted?

The goal of assessment tool validation is to make sure all elements, performance criteria, and performance and knowledge evidence are addressed by your assessment tools.

Therefore, whenever you acquire new learning resources, you must conduct assessment tool validation before allowing students to use them.

You don’t need to wait until the next scheduled validation in your 5-year cycle. Immediately validate new resources to ensure they’re ready for student use.

However, there are additional reasons to conduct this type of validation. Perform assessment tool validation also when you:

- updating your resources
- your new training products get added on scope
- when course is reviewed against training product updates
- learning resources are identified as a risk during the risk assessment

ASQA applies a risk-based approach to regulate RTOs, expecting regular risk assessments. Hence, student complaints about learning resources are a good opportunity for assessment tool validation.

Which Training Products to Validate?

Recall, this type of validation aims to ensure all learning resources are compliant before use. All RTOs must validate each unit's resources.

Assessment Tool Validation: Required Resources

Academic Resources

To conduct assessment tool validation, you will need the entire suite of your learning resources:

Mapping tool – the initial document to investigate. It identifies which assessment items address unit requirements, helping speed up validation.

Learner/student workbook – validate its suitability as an assessment tool. Confirm that instructions are clear and answer fields are sufficient. This is a common problem.

Assessor guide/marking guide – confirm that instructions for assessors are adequate and clear benchmarks for each assessment item are present. Clear benchmarks are crucial for reliable assessment outcomes.

Other related resources – these could be checklists, registers, and templates created separately from the workbook and marking guide. Validate them to confirm they fit the assessment task and meet unit requirements.

Panel for Validation

Clause 1.11 details the requirements for validation panel members, noting that validation can be conducted by one or more people. Generally, RTOs require participation from all trainers and assessors and may include industry experts.

Overall, your validation panel should have:

Current vocational competencies and relevant industry skills for the unit being validated

Recent expertise and skills in vocational teaching and learning

Any of the following training and assessment credentials:

TAE40116 Certificate IV in Training and Assessment or the successor version

Assessment validation instrument/template
Having a validation tool helps you with both the validation process and documentation. Using a validation tool makes it easier to look at how each assessment item maps against each unit requirement.
Having a validation tool aids both the validation process and documentation. It simplifies seeing how each assessment item maps to each unit requirement.
At the same time, it can serve as your document evidence that you have validated your resources before letting the students use them.
At the same time, it acts as documentation that you have validated your resources before allowing student use.

ASQA does not specify a required template for assessment tool validation, but many templates are accessible online. These tools usually have validators review the tools as a whole to ensure they meet the principles of assessment.

Principles of Assessment Template Yes/No/Partially Comments
1. Fair
2. Flexible
3. Valid
4. Reliable

Although such templates ease validation, they can cause judgment errors since there’s minimal space for comments on each assessment item.

It is highly recommended to use a more detailed template for inspecting each unit requirement and the assessment items that map to them. Below is an example:

Element Performance Criteria Assessment Directions Benchmarks Assessment Tools Rectification Recommendations
What do you Need to Check?
What Needs Inspection?

As noted in our blog post Common Problems In Assessment Tools, your assessment tools must ensure trainers follow assessment principles and evidence rules.

Key Principles of Assessment
Fairness – Is equal opportunity and access guaranteed for everyone in the assessment process?

Flexibility – Does the assessment offer various ways to demonstrate competence according to different needs and preferences?

Validity – Is the assessment assessing what it is intended to assess? Is it a valid tool for evaluating the required skill or knowledge?

Reliability – Will the assessment produce the same results each time, regardless of who conducts the training? Will different assessors make consistent decisions on skill competence?

Evidence Core Rules

Validity – Does the evidence confirm that the candidate has the skills, knowledge, and attributes described in the unit of competency and associated assessment requirements?
Sufficiency – Is there enough evidence to ensure that the learner has the skills and knowledge required?
Sufficiency – Is the evidence enough to ensure the learner has the required skills and knowledge?

Authenticity – Is the assessment tool verifying that the work belongs to the candidate?

Currency – Are the assessment tools based on current units of competency and modern industry practices?

Although these are frequently covered in VET professional development and nationally recognised training, many tools still struggle to meet these requirements.

To avoid using learning resources that leave certain unit requirements unaddressed, ensure you adhere to these guidelines:

Act on Your Words

Pay attention to the verbs in the unit requirements and ensure they are addressed by the assessment item. For example, in the unit CHCECE032 Nurture babies and toddlers, one performance evidence requirement asks students to:

Complete each of the following tasks at least once with two different babies under 12 months old in a safe environment, using age-appropriate verbal and non-verbal communication per service and regulatory requirements:

nappy changing

prepare bottle, bottle feed babies and clean equipment

prepare solids and feed infants

appropriately respond to infant signs and cues

prepare infants for sleep and settle them

monitor and foster age-appropriate physical exploration and gross motor skills

Having students explain the process of nappy changing for babies under 12 months doesn’t meet the unit requirement. Unless it’s meant to assess underpinning knowledge (i.e., knowledge evidence), students should be doing the tasks.

Notice the Plurals!
Pay attention to the numbers. In our example on one of the unit requirements of CHCECE032, this single unit requirement calls for the students to complete the tasks at least once on two different babies under 12 months of age. Having students complete the tasks listed twice on just 1 baby won’t cut it.
Notice the numbers. In the CHCECE032 example, one unit requirement requires students to complete the tasks at least once with two different babies under 12 months old. Doing the tasks twice with one baby doesn’t suffice.

All or Not Competent

Mind the lists. In the previous example, if students perform just half the tasks listed, it’s non-compliant. Each assessment item must address all requirements, or the student is not yet competent and the assessment tool is non-compliant.
Can you be more specific?
Be More Specific

Every assessment item must have clear and specific benchmark answers to guide the assessor’s judgment on student competence. Thus, make sure your instructions are not confusing for students or assessors. For example:
What kind of information can be included in a work package?
What details can be included in a work package?

The answer could include:

Obligatory resources

Appropriate costs

Time allocated for activities

Appointed duties and responsibilities

When an assessment item requires multiple answers, indicate the number of answers needed from a student. This way, your assessment is reliable, and the evidence collected is valid.

This is also true for assessment items with double-barrelled questions or questions that require more than one answer at once. Such questions can confuse both students and assessors, as illustrated in the example below:

Name a hazard and/or environmental issue in the work area and pick the most effective hazard control hierarchy.

Answers can include, but are not limited to:

Weather conditions – isolating the work area, engineering, personal protective equipment

Work area and ground conditions – elimination, isolation, engineering

People – isolating, use of engineering controls, administration

Structural hazards – substitution, isolation, engineering controls

Chemical hazards – isolating, engineering controls, administration

Equipment or machinery – isolating, engineering, more info administration

Steering clear of double-barrelled questions makes it easier for students to respond and for assessors to judge student competence accurately.

Given these requirements, you might think, “Don’t learning resource developers provide audit guarantees?” But such guarantees require you to wait for an audit before rectifying noncompliance. This impacts your compliance history, so it’s wiser to take the safe and compliant route.